Tripp Lite by Eaton SmartPro 1500VA 1350W 120V Line-Interactive Sine Wave UPS - 8 Outlets, Network Card Option, LCD, USB, DB9, 2U Rack/Tower
- Corrects under- and overvoltages from 83V to 147V
- 8 NEMA 5-15R outlets-4 switchable via network interface
- Network power management and control capability
- Interactive LCD monitoring screen
Tripp Lite by Eaton SmartPro 1500VA 1350W 120V Line-Interactive Sine Wave UPS - 8 Outlets, Network Card Option, LCD, USB, DB9, 2U Rack/Tower - Protects Mission-Critical Rack-Mounted Equipment
Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload, low battery and fault conditions
8 NEMA 5-15R outlets
10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
0.9 power factor rating
570-joule surge suppression rating
Reliable Battery Backup
Supports half load up to 13 min. and full load up to 4.5 min.
Internal batteries designed for hot-swap field replacement
95% line-power efficiency rating saves money in energy costs
2 Load Banks with Switchable Outlets
Can control 4 outlets remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
Interactive LCD Screen
Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
Rotates for easy viewing in rack-mount or tower configurations
Network Management Cards
Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
Communications Ports
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from
EPO">www.tripplite.com/poweralert port supports emergency shutdown in large facilities
EPO">
Versatile Installation Options
EPO">
Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
Mounts in upright tower position with optional 2-9USTAND accessory
EPO">
More from the Manufacturer
- Corrects under- and overvoltages from 83V to 147V
- 8 NEMA 5-15R outlets-4 switchable via network interface
- Network power management and control capability
- Interactive LCD monitoring screen
- 13 min. runtime at half load; 4.5 min. at full load
- Experience higher efficiency with lower energy cost
- Up to 4.50 minute runtime on full load to preserve critical data from power shortage interruptions
- Prevent critical data loss by staying powered during a blackout with up to 1350 W load capacity
- 1500 VA load capacity provides sufficient backup during power failures
- 4 Hour typical battery recharge time to allow uninterrupted usage without requiring power outlet
- Replaceable battery for reliable output for prolonged usage with maximum efficiency
- Lead Acid battery chemistry for your convenience and better usability
- NEMA 5-15P plug/connector type for maximum usability with added reliability
- NEMA 5-15R receptacle type provides secure, reliable connection with added productivity
- 110 V AC input voltage for maximum feasibility and added productivity
-
Additional InformationSMART1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank) Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additoinal UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter Emergency Power Off (EPO) interface with cable Multi-function audible alarms and set of 5 front panel LEDs Network-grade AC surge suppression Attractive all-black color scheme UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary 1500VA / 1350 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking, telecom and other sensitive electronic devices Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional 2-9USTAND accessory Large internal batteries offer runtimes of 25 minutes at half load (750VA / 500 watts) and 10 minutes at full load (1500VA / 1350 watts) This unit has an LCD screen PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
-
AlarmLow Battery On Battery Overload
-
Battery ChemistryLead Acid
-
Battery Life6 Year
-
Brand NameTripp Lite by Eaton
-
Certifications & StandardsUL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
-
Cord Length10 ft
-
Country of OriginChina
-
DC System Voltage36 V DC
-
Depth13.5"
-
Emergency Power OFFYes
-
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
-
Environmentally FriendlyYes
-
Form FactorRack-mountable
-
Height3.5"
-
Hot SwappableYes
-
Input Voltage110 V AC
-
Limited Warranty3 Year
-
Load Capacity (VA)1500 VA
-
Load Capacity (Watt)1350 W
-
Manufacturer Part NumberSMART1500RM2U
-
Maximum Operating Elevation6561.68 ft
-
Maximum Operating Temperature104°F (40°C)
-
Network ManagementSNMP/Webcard
-
Output Voltage120 V AC
-
Overload ProtectionYes
-
Package ContentsSmartPro 1500RM2U UPS Mounting hardware for 4 post rackmount installation PowerAlert unattended shutdown and UPS/Power monitoring software Warranty information Cabling for USB & DB9 monitoring and EPO switching
-
Plug/Connector TypeNEMA 5-15P
-
Product LineSmartPro
-
Product NameSmartPro 1500RM2U UPS
-
Product TypeLine-interactive UPS
-
Rack Height2U
-
Receptacle Detail8 x NEMA 5-15R
-
Receptacle TypeNEMA 5-15R
-
RecycledNo
-
Replaceable BatteryYes
-
Sound Emission (A-Weighted)45 dB(A)
-
Status IndicatorsLED Indicator
-
Storage Relative Humidity0% - 95%
-
Storage Temperature5°F (-15°C) - 122°F (50°C)
-
Surge Energy Rating570 J
-
Thermal Dissipation78.25 W
-
Transfer Time4 ms
-
Typical Battery Recharge Time4 Hour
-
USBYes
-
Waveform TypeSine Wave
-
Width17.5"