Pinch to zoom
Tripp Lite by Eaton SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 1U Rack/Vertical, WEBCARDLX Network Interface, USB, DB9, 6 Outlets
Product Number: SYNX4294053
$1,063.70
Loading...
Loading...
Product Description
Tripp Lite by Eaton SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 1U Rack/Vertical, WEBCARDLX Network Interface, USB, DB9, 6 Outlets
1000 VA/800 W - 120 V AC - 4 Minute Stand-by Time - 1U Rack-mountable - 6 x NEMA 5-15R
Description:
Protects Mission-Critical Rack-Mounted Equipment
Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload and low battery
6 NEMA 5-15R outlets
10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
450-joule surge suppression rating Reliable Battery Backup
Supports half load up to 14 min. and full load up to 4 min.
Internal batteries designed for hot-swap field replacement Pre-Installed WEBCARDLX Network Interface
Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status Reduce Service Calls with Auto Probe Autonomous Device Management
Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA) Switchable Outlets
2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
LED Indicators
Front-panel LEDs signal power, voltage correction, load level and battery charge state
Communications Ports
USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
EPO port supports emergency shutdown in large facilities
Versatile Installation Options
Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
Compatible with vertical mount cabinets
More from the Manufacturer
Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload and low battery
6 NEMA 5-15R outlets
10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
450-joule surge suppression rating Reliable Battery Backup
Supports half load up to 14 min. and full load up to 4 min.
Internal batteries designed for hot-swap field replacement Pre-Installed WEBCARDLX Network Interface
Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status Reduce Service Calls with Auto Probe Autonomous Device Management
Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA) Switchable Outlets
2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
LED Indicators
Front-panel LEDs signal power, voltage correction, load level and battery charge state
Communications Ports
USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
EPO port supports emergency shutdown in large facilities
Versatile Installation Options
Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
Compatible with vertical mount cabinets
More from the Manufacturer
- Corrects under- and overvoltages from 83V to 147V
- 6 NEMA 5-15R outlets-2 switchable via network interface
- Network power management and control capability
- Pre-installed WEBCARDLX network interface
- 14 min. runtime at half load; 4 min. at full load
- Experience higher efficiency with lower energy cost
- Keep your sensitive devices powered with a backup of up to 4 minute at full load
- 800 W load capacity - backup power for your valuable electronics
- 1000 VA load capacity provides sufficient backup during power failures
- NEMA 5-15R receptacle type provides secure, reliable connection with added productivity
- 120 V AC input voltage for optimal performance with maximum usability
- 120 V AC output voltage for better reliance and maximum usability
- Rack-mountable line-interactive ups allows easy and convenient usage without any hassle
Product Specifications
-
Brand NameTripp Lite by Eaton
-
Country of OriginChina
-
Depth16.8"
-
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
-
Environmentally FriendlyYes
-
Form FactorRack-mountable
-
Height1.7"
-
Input Voltage120 V AC
-
Limited Warranty3 Year
-
Load Capacity (VA)1000 VA
-
Load Capacity (Watt)800 W
-
Manufacturer Part NumberSMART1000RM1UN
-
Output Voltage120 V AC
-
Package ContentsSmartPro SMART1000RM1UN 1kVA Rack-mountable Mounting Hardware PowerAlert Unattended Shutdown and UPS/Power Monitoring Software Instruction Manual Cabling for USB & DB9 Monitoring and EPO Switching
-
Product LineSmartPro
-
Product ModelSMART1000RM1UN
-
Product NameSmartPro SMART1000RM1UN 1kVA Rack-mountable
-
Product TypeLine-interactive UPS
-
Rack Height1U
-
Receptacle Detail6 x NEMA 5-15R
-
Receptacle TypeNEMA 5-15R
-
Width17.5"