Pinch to zoom
Tripp Lite by Eaton SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 2U Rack/Tower, Network Card Options, LCD, USB, DB9, 6 Outlets
Product Number: SYNX995160
$606.18
Loading...
Loading...
Product Description
Tripp Lite by Eaton SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 2U Rack/Tower, Network Card Options, LCD, USB, DB9, 6 Outlets
1000VA/800W - 5.3 Minute Full Load - 6 x NEMA 5-15R
Description:
Protects Mission-Critical Rack-Mounted Equipment
Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload, low battery and fault conditions
6 NEMA 5-15R outlets
10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
570-joule surge suppression rating
Reliable Battery Backup
Supports half load up to 15 min. and full load up to 5.3 min.
Internal batteries designed for hot-swap field replacement
95% line-power efficiency rating saves money in energy costs
Switchable Outlets
2 load banks, each with 2 outlets controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
Interactive LCD Screen
Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
Rotates for easy viewing in rack-mount or tower configurations
Network Management Cards
Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
Communications Ports
USB and DB9 ports combine with PowerAlert software, available via free download, to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
EPO port supports emergency shutdown in large facilities
Versatile Installation Options
Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
More from the Manufacturer
Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload, low battery and fault conditions
6 NEMA 5-15R outlets
10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
570-joule surge suppression rating
Reliable Battery Backup
Supports half load up to 15 min. and full load up to 5.3 min.
Internal batteries designed for hot-swap field replacement
95% line-power efficiency rating saves money in energy costs
Switchable Outlets
2 load banks, each with 2 outlets controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
Interactive LCD Screen
Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
Rotates for easy viewing in rack-mount or tower configurations
Network Management Cards
Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
Communications Ports
USB and DB9 ports combine with PowerAlert software, available via free download, to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
EPO port supports emergency shutdown in large facilities
Versatile Installation Options
Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
More from the Manufacturer
- Corrects under- and overvoltages from 83V to 147V
- 6 NEMA 5-15R outlets-4 switchable via network interface
- Network power management and control capability
- Interactive LCD monitoring screen
- 15 min. runtime at half load; 5.3 min. at full load
- Line-interactive UPS is a productive and reliable power supply solution
- Up to 5.30 minute runtime on full load to preserve critical data from power shortage interruptions
- 800 W load capacity - backup power for your valuable electronics
- 1000 VA load capacity - work without any interruption during power outages
- 4 Hour typical battery recharge time to allow optimal performance for longer hours with added efficiency
- Lead Acid battery chemistry for your convenience and better usability
- NEMA 5-15P plug/connector type for a secure, feasible operation
- NEMA 5-15R receptacle type offers ease of operation with maximum efficiency
- 120 V AC input voltage for better reliance and maximum dependability
- 120 V AC output voltage for optimal performance with maximum feasibility
Product Specifications
-
AlarmLow Battery On Battery Overload
-
Battery ChemistryLead Acid
-
Brand NameTripp Lite by Eaton
-
Certifications & StandardsUL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
-
Cord Length10 ft
-
Country of OriginChina
-
Depth12.5"
-
Emergency Power OFFYes
-
Height3.5"
-
Hot SwappableYes
-
Input Voltage120 V AC
-
Limited Warranty3 Year
-
Load Capacity (VA)1000 VA
-
Load Capacity (Watt)800 W
-
Manufacturer Part NumberSMART1000RM2U
-
Maximum Operating Temperature104°F (40°C)
-
Network ManagementSNMP Manageable
-
Output Voltage120 V AC
-
Package ContentsSMART1000RM2U UPS System PowerAlert Software CD 4 x Post Rackmount Installation Kit Instruction Manual Serial & EPO Cabling
-
Plug/Connector TypeNEMA 5-15P
-
Product LineSmartPro
-
Product NameSMART1000RM2U UPS System
-
Product TypeLine-interactive UPS
-
Rack Height2U
-
Receptacle Detail6 x NEMA 5-15R
-
Receptacle TypeNEMA 5-15R
-
RecycledNo
-
Software IncludedPowerAlert Software
-
Typical Battery Recharge Time4 Hour
-
USBYes
-
Waveform TypeSine Wave
-
Width17.5"