Pinch to zoom
Tripp Lite by Eaton 500VA 300W 120V Line-Interactive UPS - 6 NEMA 5-15R Outlets, USB, DB9, Network Card Option, 1U Rack/Tower
Product Number: TRPSMART500RT1U
$252.72
Loading...
Loading...
Product Description
Tripp Lite by Eaton 500VA 300W 120V Line-Interactive UPS - 6 NEMA 5-15R Outlets, USB, DB9, Network Card Option, 1U Rack/Tower
1U Rack/Tower - 4 Hour Recharge - 3.20 Minute Stand-by - 120 V AC Input - 120 V AC Output - 6 x NEMA 5-15R
Description:
500VA/300W/120V Battery Backup for PC Networks, Security Systems or Digital Signage
The SmartPro line-interactive SMART500RT1U UPS system with AVR protection provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable electronics or destroy data. The 120V battery backup is ideal protection for point-of-sale and kiosk applications, a small business VoIP network, or rack-mount equipment in your server room or network closet.
Allows Time to Back Up Critical Files During a Blackout
Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (150W) powered as long as 14 minutes and a full load (300W) up to three minutes.
6 NEMA Outlets Protect Your Connected Components
Six 5-15R outlets provide battery backup, 567 joules of network-grade surge protection and voltage regulation for your crucial components. Five outlets are UPS-supported, and one is surge-only to connect peripherals not requiring battery backup. One UPS-supported outlet is switchable, allowing you to power its connected device on and off remotely to reset or reboot it or to shed a less significant load to extend battery runtime for more critical equipment.
Automatic Voltage Regulation (AVR) Corrects Low-Voltage Conditions
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART500RT1U maintains regulated 120V nominal output during brownouts as low as 90V, while keeping the battery fully charged and ready to take over in case of power failure. The fast-to-recharge internal batteries are field-replaceable and hot-swappable.
Optional WEBCARDLXE Network Interface Offers 24/7 Access
An accessory slot accommodates the optional Java-free HTML5-based WEBCARDLXE interface (sold separately), which enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Automated alerts help prevent accidental overloads, power loss and downtime.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
Designed for High Efficiency to Help You Save Money and Protect the Environment
A 97% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs.
LED Indicators and Audible Alarms Keep You Informed
Five front-panel LEDs keep you apprised of line power, battery power, overload, voltage regulation and battery low/replace status at a glance. A multi-function alarm sounds to warn you of power failure, overload and low-battery conditions.
More from the Manufacturer
The SmartPro line-interactive SMART500RT1U UPS system with AVR protection provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable electronics or destroy data. The 120V battery backup is ideal protection for point-of-sale and kiosk applications, a small business VoIP network, or rack-mount equipment in your server room or network closet.
Allows Time to Back Up Critical Files During a Blackout
Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (150W) powered as long as 14 minutes and a full load (300W) up to three minutes.
6 NEMA Outlets Protect Your Connected Components
Six 5-15R outlets provide battery backup, 567 joules of network-grade surge protection and voltage regulation for your crucial components. Five outlets are UPS-supported, and one is surge-only to connect peripherals not requiring battery backup. One UPS-supported outlet is switchable, allowing you to power its connected device on and off remotely to reset or reboot it or to shed a less significant load to extend battery runtime for more critical equipment.
Automatic Voltage Regulation (AVR) Corrects Low-Voltage Conditions
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART500RT1U maintains regulated 120V nominal output during brownouts as low as 90V, while keeping the battery fully charged and ready to take over in case of power failure. The fast-to-recharge internal batteries are field-replaceable and hot-swappable.
Optional WEBCARDLXE Network Interface Offers 24/7 Access
An accessory slot accommodates the optional Java-free HTML5-based WEBCARDLXE interface (sold separately), which enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Automated alerts help prevent accidental overloads, power loss and downtime.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
Designed for High Efficiency to Help You Save Money and Protect the Environment
A 97% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs.
LED Indicators and Audible Alarms Keep You Informed
Five front-panel LEDs keep you apprised of line power, battery power, overload, voltage regulation and battery low/replace status at a glance. A multi-function alarm sounds to warn you of power failure, overload and low-battery conditions.
More from the Manufacturer
- 1U rack-mount UPS offers complete power protection for small network applications, including telecom, security and digital signage
- Protects equipment against blackouts, brownouts, transient surges and line noise
- Keeps AC power running during blackouts to allow time for file saves and safe shutdown
- Maintains continuous 120V nominal output during brownouts as low as 90V
- 6 NEMA 5-15R outlets power and protect networking, telecom and other sensitive equipment
- Optional WEBCARDLXE network interface allows you 24/7 remote access from anywhere
- 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
- $250,000 Ultimate Lifetime Insurance
- Experience higher efficiency with lower energy cost
- Up to 3.20 minute runtime on full load to preserve critical data from power shortage interruptions
- 300 W load capacity - backup power for your valuable electronics
- 500 VA load capacity - work without any interruption during power outages
- 4 Hour typical battery recharge time to allow uninterrupted usage without requiring power outlet
- Lead Acid battery chemistry to better suit your requirements with maximum productivity
- NEMA 5-15P plug/connector type for convenient usage with added dependability
- NEMA 5-15R receptacle type offers maximum safety, convenience, and increased usability
- 120 V AC input voltage for optimal performance with maximum usability
- 120 V AC output voltage for maximum dependability and added productivity
- Works adequately in situations where the supply is prone to sags and surges
- Keep your sensitive devices powered with a backup of up to 3.20 minute at full load
- 500 VA load capacity provides sufficient backup during power failures
- Lead Acid battery chemistry for your convenience and better usability
- 120 V AC input voltage for better reliance and maximum dependability
Product Specifications
-
Additional Information500VA / 300 watt power handling capability compatibile with networking, telecom and other sensitive electronic devices SMART500RT1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts, plus network-grade AC surge suppression Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported - mounting accessories included Large internal batteries offer runtimes of 17 minutes at half load (250VA / 150 watts) and 5 minutes at full load (500VA / 300 watts) Maintains regulated 120V nominal output during brownouts as low as 90V Includes 6 UPS-supported outlets, with one single outlet load bank that can be powered off and back on again via software interface. One additional surge-only outlet powers accessories not requiring battery support PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter Emergency Power Off (EPO) interface with cable Multi-function audible alarms and set of 5 front panel LEDs Network-grade AC surge suppression Attractive all-black color scheme UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
-
AlarmOn Battery Overload UPS Fault Low Battery
-
Backup/Run Time0.08 Hour 353.55 W Full Load 0.28 Hour 176.78 W Half Load
-
Battery ChemistryLead Acid
-
Brand NameTripp Lite by Eaton
-
Cord Length10 ft
-
Country of OriginChina
-
Depth11.8"
-
Emergency Power OFFYes
-
Form FactorRack/Tower
-
Hot SwappableYes
-
Input Voltage120 V AC
-
Limited Warranty3 Year
-
Load Capacity (VA)500 VA
-
Load Capacity (Watt)300 W
-
ManufacturerTripp Lite
-
Manufacturer Part NumberSMART500RT1U
-
Manufacturer Website Addresswww.tripplite.com
-
Marketing InformationSmartPro 500VA Rack/Tower UPS System with seven outlets protects network servers against damage and downtime due to blackouts, brownouts, overvoltages and surges. Advanced automatic voltage regulation keeps servers productive through brownouts and overvoltages without using battery power. Up to four built-in communication ports and intelligent operation provide advanced power monitoring and control when used with included PowerAlert Software. Adapts to 1U rackmount or tower applications.
-
Maximum Operating Temperature122°F (50°C)
-
Network ManagementSNMP Manageable
-
Output Voltage120 V AC
-
Package ContentsMounting hardware Cabling for USB & DB9 monitoring and EPO switching PowerAlert unattended shutdown and UPS/Power monitoring software Warranty information and instruction manual SMART500RT1U UPS System
-
Plug/Connector TypeNEMA 5-15P
-
Product ColorBlack
-
Product LineSmartPro
-
Product ModelSMART500RT1U
-
Product NameSmartPro 500VA Rack/Tower UPS
-
Product TypeLine-interactive UPS
-
Rack Height1U
-
Receptacle Detail6 x NEMA 5-15R
-
Receptacle TypeNEMA 5-15R
-
Serial PortYes
-
Shipping Dimensions5" Height x 22.50" Width x 16" Depth
-
Software IncludedPowerAlert Software
-
Status Indicators5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
-
Surge Energy Rating480 J
-
System RequirementsTYPICAL APPLCIATIONS: Ideal for protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
-
Temperature32?F (0?C) to 104?F (40?C) Operating 5?F (-15?C) to 122?F (50?C)
-
Transfer Time4 ms
-
Typical Battery Recharge Time4 Hour
-
USBYes
-
Waveform TypePulse-width Modulated Sine Wave
-
Weight (Approximate)18.80 lb
-
Width17.5"