Pinch to zoom
Eaton Tripp Lite Series SmartPro 3000VA 3000W 120V Line-Interactive Sine Wave UPS - 7 Outlets, Extended Run, Network Card Included, LCD, USB, DB9, 2U Rack/Tower
Product Number: SYNX3461634
$2,244.10
Loading...
Loading...
Product Description
Eaton Tripp Lite Series SmartPro 3000VA 3000W 120V Line-Interactive Sine Wave UPS - 7 Outlets, Extended Run, Network Card Included, LCD, USB, DB9, 2U Rack/Tower
3000 VA/3000 W - 120 V AC - 3 Minute Stand-by Time - 2U Tower/Rack Mountable - 1 x NEMA L5-30R, 8 x NEMA 5-15/20R
Description:
3kVA/3kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments
The SMART3000RMXLN provides reliable battery backup and AC power protection for connected devices against blackouts, brownouts, surges and line noise. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment. Pure sine wave power and unity power factor, even when on battery, means this SmartPro UPS can be used with sensitive IT equipment, including servers, VoIP phones, data storage and PoE switches. Even if the battery is depleted, the UPS will automatically restart when the power comes back on after an extended outage.
Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages
The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately).
NEMA Outlets Protect Your Connected Components
One L5-30R and six managed 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
Pre-Installed LX Platform Network Management Card Allows Remote Access 24/7
The WEBCARDLXE network interface enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring
The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.
Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART3000RMXLN maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
More from the Manufacturer
The SMART3000RMXLN provides reliable battery backup and AC power protection for connected devices against blackouts, brownouts, surges and line noise. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment. Pure sine wave power and unity power factor, even when on battery, means this SmartPro UPS can be used with sensitive IT equipment, including servers, VoIP phones, data storage and PoE switches. Even if the battery is depleted, the UPS will automatically restart when the power comes back on after an extended outage.
Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages
The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately).
NEMA Outlets Protect Your Connected Components
One L5-30R and six managed 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
Pre-Installed LX Platform Network Management Card Allows Remote Access 24/7
The WEBCARDLXE network interface enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring
The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.
Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART3000RMXLN maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
More from the Manufacturer
- Provides safe and reliable sine wave power to high-end server and network equipment used in SMB, Edge network and enterprise environments
- Delivers stable sine wave output in battery mode compatible with sensitive equipment
- Corrects brownouts and overvoltages without switching to battery power
- Unity power factor ensures maximum power possible at each power rating
- ENERGY STAR 2.0-certified to save electricity, lower costs and protect the environment
- Included WEBCARDLXE network interface allows 24/7 remote access and control
- 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
- $250,000 Ultimate Lifetime Insurance
- Line-interactive UPS is a productive and reliable power supply solution
- Up to 3 minute runtime on full load to preserve critical data from power shortage interruptions
- 2880 W load capacity - backup power for your valuable electronics
- 3000 VA load capacity provides sufficient backup during power failures
- 5 Hour typical battery recharge time to allow uninterrupted usage without requiring power outlet
- Replaceable battery for optimal performance with maximum charged dependability
- NEMA L5-30P plug/connector type for maximum usability with added reliability
- NEMA L5-30R receptacle type provides secure, reliable connection with added productivity
- Single Phase phase for better usability and increased efficiency
- 120 V AC input voltage for optimal performance with maximum usability
Product Specifications
-
AVRYes
-
AlarmLow Battery Overload Power Failure Remote Shutdown UPS Fault UPS StartUp
-
Brand NameTripp Lite series
-
Certifications & StandardsUL1778 CSA NOM FCC Part 15 Category B (EMI)
-
Country of OriginChina
-
DC System Voltage48 V DC
-
Depth19"
-
EMI/RFI Noise FilterYes
-
Emergency Power OFFYes
-
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
-
Environmentally FriendlyYes
-
Form FactorRack/Tower
-
Height3.5"
-
Hot SwappableYes
-
Input Frequency60 Hz
-
Input Voltage120 V AC
-
Limited Warranty2 Year
-
Load Capacity (VA)3000 VA
-
Load Capacity (Watt)2880 W
-
Manufacturer Part NumberSMART3000RMXLN
-
Maximum Operating Temperature104°F (40°C)
-
Network ManagementSNMP Manageable
-
Output Frequency60 Hz
-
Output Voltage120 V AC 110 V AC 115 V AC
-
Package Contents3000VA 3000W 120V Line-Interactive UPS WEBCARDLXE network management card 2 x USB cables DB9 cable Rack-mounting hardware Tower support stands Quick Start Guide with safety instructions
-
PhaseSingle Phase
-
Plug/Connector TypeNEMA L5-30P
-
Product ModelSMART3000RMXLN
-
Product NameSMART3000RMXLN UPS System with Pre-installed SNMPWEBCARD
-
Product SeriesSmartPro
-
Product TypeLine-interactive UPS
-
Rack Height2U
-
Receptacle Detail1 x NEMA L5-30R 8 x NEMA 5-15/20R
-
Receptacle TypeNEMA 5-15/20R NEMA L5-30R
-
Replaceable BatteryYes
-
Serial PortYes
-
Software IncludedPowerAlert Software
-
Status IndicatorsNetwork Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec).
-
Storage Temperature5°F (-15°C) - 122°F (50°C)
-
Surge Energy Rating570 J
-
Transfer Time5 ms
-
Typical Battery Recharge Time5 Hour
-
USBYes
-
Waveform TypePure Sine Wave
-
Width17.5"