![SYNX2245505](https://de2wfhoo6xqi5.cloudfront.net/size/600/805/da9/68e4391f025f96a0b1ea611d2aaa1dcf87.jpg)
![](https://de2wfhoo6xqi5.cloudfront.net/size/160/805/da9/68e4391f025f96a0b1ea611d2aaa1dcf87.jpg)
![SYNX2245505](https://de2wfhoo6xqi5.cloudfront.net/orig/805/da9/68e4391f025f96a0b1ea611d2aaa1dcf87.jpg)
Pinch to zoom
![](https://de2wfhoo6xqi5.cloudfront.net/size/160/805/da9/68e4391f025f96a0b1ea611d2aaa1dcf87.jpg)
Eaton Tripp Lite Series Fiber Optic Mode Conditioning Patch Cable (ST/LC), 3M (10 ft.)
Product Number: SYNX2245505
$88.56
Loading...
Loading...
Eaton Tripp Lite Series Fiber Optic Mode Conditioning Patch Cable (ST/LC), 3M (10 ft.)
LC Male - ST Male - 9.84ft
Description:
Tripp Lites Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. They are fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber.
- 3 Meter LC/ST Mode Conditioning Cable
- 62.5/125 and 8.3/125
- Run 1000Base-LX Gigabit Ethernet over MMF by offsetting signal loss
- IEEE 802.3z Gigabit Ethernet Compliant
- Experience a simpler way to connect devices with the entire business network
- Features fiber optic cable type to better accommodate your precise power supply requirements with maximum charging productivity
-
Additional InformationColor: Orange/Yellow
-
Brand NameTripp Lite series
-
Cable CharacteristicPatch Cable
-
Cable Length10 ft
-
Cable TypeFiber Optic
-
Certifications & StandardsIEEE 802.3z
-
Connector Type on First EndLC - Male
-
Connector Type on Second EndST - Male
-
Connector on First End Details2 x LC - Male
-
Connector on Second End Details2 x ST - Male
-
Country of OriginChina
-
Limited WarrantyLifetime
-
Manufacturer Part NumberN422-03M
-
Package ContentsFiber Optic Duplex Patch Cable 3 Meter LC/ST Mode Conditioning Cable
-
Product ModelN422-03M
-
Product NameFiber Optic Duplex Patch Cable
-
Product TypeNetwork Cable