Loading...
Pinch to zoom
C2G 50 Watt Audio Amplifier - 25/70V - Plenum Rated
Product Number: SYNX3958725
Sold Out
This product is sold out and we do not know when we will be getting another shipment. We apologize for any inconvenience this may cause.
Check similar items above to see if a replacement product is available.
Product Description
C2G 50 Watt Audio Amplifier - 25/70V - Plenum Rated
20 kHz - 100 Hz to 20 kHz
Description:
The 25/70V 50W Audio Amplifier is the ideal solution for supporting a distributed audio system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 25/70 Volt design. This amplifier supports many advanced features which make it a perfect fit for most applications
Noise Reduction:
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
Standby Mode:
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.
Accessory Power Output:
The accessory power output provides 12 Volts DC and 500 mAmps.
Noise Reduction:
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
Standby Mode:
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.
Accessory Power Output:
The accessory power output provides 12 Volts DC and 500 mAmps.
- Classroom Audio Amplifier
- 50 Watts of Power
- Plenum Rated
- Conference Room Amplifier
- Reduces noise in commercial environments
- Industry standard 25/70 volt design for distributed audio systems
- Standby mode saves power
- Designed for installation in Plenum air spaces
- TAA Compliant
- C2G 1 Year Warranty
- Increase the power of electric signals and enhance performance with this signal amplifier
- Supports up to 20 kHz frequency
Product Specifications
-
Additional InformationSignal Noise: >80dB Input Sensitivity: -10dBV (316mV) THD + Noise: < ±0.05% @ 1 KHz at nominal level (1 watt) Operating Temperature: 0 TO +50° C / 10% TO 90% RH, Non-condensing Storage Temperature: -25° TO +70° C / 10% TO 90% RH, Non-condensing
-
Brand NameC2G
-
Country of OriginTaiwan
-
Depth4.5"
-
Environmentally FriendlyYes
-
Height1.5"
-
Impedance18 Kilo Ohm
-
Input Voltage230 V AC
-
Limited Warranty1 Year
-
Manufacturer Part Number40881
-
Maximum Frequency20 kHz
-
Minimum Frequency100 Hz
-
Product ColorBlack
-
Product MaterialMetal
-
Product Name25/70V 50W Audio Amplifier - Plenum Rated
-
Product TypeSignal Amplifier
-
Width4.3"