Pinch to zoom
VELCRO Brand Extreme Self Stick Fastener Strips, 1" x 4", Gray, Box Of 10 Strips
Loading...
Other Product Options
VELCRO Brand Extreme Self Stick Fastener Strips, 1" x 4", Gray, Box Of 10 Strips
4" Length x 1" Width - Polyester - Water Resistant, UV Resistant - For Brick, Wood, Concrete - 10 / Carton - Gray, Titanium
$5.09
Loading...
Loading...
Product Description
VELCRO Brand Extreme Self Stick Fastener Strips, 1" x 4", Gray, Box Of 10 Strips
4" Length x 1" Width - Polyester - Water Resistant, UV Resistant - For Brick, Wood, Concrete - 10 / Carton - Gray, Titanium
Description:
Feature an all-weather, UV-resistant adhesive for rough surfaces including concrete and certain types of brick. Superior holding power meets the requirements of demanding indoor and outdoor applications without drilling, nails, screws or epoxy. Holds up to 15 lbs.
- NO TOOLS REQUIRED: No hammer, drilling, nails, or epoxy necessary; a simple solution to organize on many surfaces without putting holes in the wall
- For use in extreme temps, from -40*-194*
- Ideal option when 50% more strength is needed for keeping things organized and connected
- Holds up to 10 lbs. (1 lb. per 1" square)
Product Specifications
-
Additional InformationShape: Strips Care and Application: Instructions: Clean and dry surface before application Peel tape from fastener and press firmly into place Adhesive reaches maximum strength after 24 hours Note: Recommended for temperatures between 0°F to 140°F. Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener. May not adhere well to certain types of brick - testing is recommended. Removal Instructions: Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun) Peel off the tape (Hook or Loop) the adhesive will remain on the substrate Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments) Stick the ball on the adhesive which is on your substrate and pull it off Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners Weight Rating: 1 lbs per square inch up to 15 lbs Functional Temperature Range: 0-140° F (-18-60° C)
-
Application/UsageWood Concrete Brick Outdoor
-
Assembly RequiredNo
-
Brand NameVELCRO Brand
-
ColorGray; Titanium
-
Color(s)Titanium
-
Country of OriginUS
-
DurabilityWater Resistant UV Resistant
-
FeaturesHeavy Duty
-
Global Product TypeComplete Hook & Loop Fastener Sets
-
Hook and Loop Fastener TypeHeavy-Duty Strip
-
ManufacturerVELCRO USA INC
-
Manufacturer Part Number90812
-
Manufacturer Website Addresswww.velcro.com
-
Marketing InformationAdhesive will stick to most rough surfaces such as brick, wood, concrete and more. Adhesive is also water-resistant. Requires time for adhesive to set before mating the hook and loop. Designed for permanently placing items.
-
Packaged Quantity10 / Pack
-
Post-Consumer Recycled Content Percent0%
-
Pre-Consumer Recycled Content Percent0%
-
Product ColorGray Titanium
-
Product LineExtreme
-
Product MaterialPolyester
-
Product NameExtreme Outdoor Tape Strips
-
Product TypeHook & Loop Strip
-
RecycledNo
-
RefurbishedN
-
Shipping Weight (Approximate)2.24 oz
-
Special FeaturesExtreme Outdoor Performance
-
Tape Length4"
-
Tape Pad Size1" x 4"
-
Tape Width1"
-
Total Recycled Content Percent0%
-
Weight CapacityUp to 15 lbs