Pinch to zoom
3M Diagonal Stripe Safety Tape - 36 yd Length x 2" Width - Vinyl - 5.40 mil - Rubber Resin Backing - Abrasion Resistant, Chemical Resistant - For Hazard Identification, Floor Marking - 1 / Roll - Black, Yellow
Product Number: MMM57022
$59.29
Loading...
Loading...
Product Description
3M Diagonal Stripe Safety Tape - 36 yd Length x 2" Width - Vinyl - 5.40 mil - Rubber Resin Backing - Abrasion Resistant, Chemical Resistant - For Hazard Identification, Floor Marking - 1 / Roll - Black, Yellow
36 yd Length x 2" Width - Vinyl - 5.40 mil - Rubber Resin Backing - Abrasion Resistant, Chemical Resistant - For Hazard Identification, Floor Marking - 1 / Roll - Black, Yellow
Description:
Mark off traffic areas, physical hazards and work sites with this attention-getting adhesive-backed tape. Yellow-black color design provides a simple, yet effective, way to communicate that an area is off limits. Features a rubber adhesive that sticks quickly to a variety of surfaces, and removes just as easily, leaving no messy residue. Flexible and abrasion resistant, it conforms around corners, curves and on uneven surfaces. Resists most common solvents including acids and alkaline chemicals.
- Used to identify and mark traffic areas and physical hazards
- Vivid yellow and black stripes are locked into the vinyl for permanent high visibility
- Stretches and conforms to curved surfaces and around corners for an accurate fit
- Resists abrasion, scuffing, moisture and weathering for long service life
- Applies instantly and is ready to use immediately
Need more information?
Ask a Question
Product Specifications
-
Application/UsageHazard Identification Floor Marking
-
Assembly RequiredNo
-
Brand Name3M
-
ColorBlack/Yellow
-
Color(s)Black/Yellow
-
Color FamilyMulticolor
-
Country of OriginUS
-
DurabilityAbrasion Resistant Chemical Resistant
-
Global Product TypeBarrier/Block-Off Tapes
-
Length108 ft
-
Manufacturer3M CO
-
Manufacturer Part Number57022
-
Manufacturer Website Addresswww.3m.com
-
Marketing InformationSafety stripe tape features a diagonal stripe, 5.4 mil (0.14 mm), and vinyl backing with rubber adhesive. Highly conformable and resistant to most common solvents. The design of clear vinyl over colored stripes provides excellent abrasion resistance to the tape's stripped pattern.
-
MaterialVinyl
-
Packaged Quantity1 Roll
-
Post-Consumer Recycled Content Percent0%
-
Pre-Consumer Recycled Content Percent0%
-
Product ColorBlack Yellow
-
Product Model5702-2
-
Product NameDiagonal Stripe Safety Tape
-
Product TypeIndustrial Tape
-
RecycledNo
-
RefurbishedN
-
Safety Tapes TypeMarking Tape
-
Shipping Weight (Approximate)11.20 oz
-
Tape Length36 yd
-
Tape Width2"
-
Total Recycled Content Percent0%
-
Width2"