Betco BetcoBest LM Floor Finish
Product #:
BET644B500
$273.83
Loading...
Product Description
Betco BetcoBest LM Floor Finish
For Floor, Tile, Hard Surface - Liquid - 640 fl oz (20 quart) - 9 pH - Mild Scent - Powder Resistant, Black Mark Resistant, Scuff Resistant, Heel Mark Resistant - Crystal Clear, Opaque - 1 Each
BetcoBest LM floor finish is a proven quantum leap in floor care technology for a deep, high gloss. This innovative floor finish utilizes an exclusive patent-pending technology from Betco to combine a high solid content and low viscosity for fewer coats, resulting in highly effective, labor-saving floor finishing. This finish maintains a high gloss with minimal burnishing and fewer coats than conventional products. It is perfect for high-traffic applications. Built-in application indicator makes training easy. It is recommended for use on all types of resilient tile flooring and properly prepared hard surfaces. Floor finish covers 2,000 to 3,000 square feet per gallon and dries in 20 to 30 minutes.
- 40% less labor compared to conventional finishes
- Requires half the coats of conventional finish
- $1,000 saved on average per location per strip/refinish project
- 50% higher gloss with fewer coats, even with minimal burnishing
- Scuff-Resistant Technology (SRT) resists black heel marks
- Perfectly and quickly cleans any household surface
- Leaves behind a pleasant and refreshing mild scent
- Effectively cleans floor
Loading...
Product Specifications
-
Applicable MaterialHard Floor Surfaces Hard Floor Surfaces
-
ApplicationFloor Finish
-
Application/UsageFloor Tile Hard Surface
-
Assembly RequiredNo
-
Brand NameBetco
-
Cleaner FormLiquid
-
Cleaner Volume640 fl oz (20 quart)
-
Country of OriginUnited States
-
Directions/InstructionsRecommended for use on all types of resilient tile flooring and properly prepared hard surfaces. RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, medium to medium-heavy coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. 2 - 3 coats are recommended. NOTE: This product contains an opaque application indicator that will clarify when drying. This is a self-sealing finish; however, if tile is old, worn or porous a Betco floor sealer can be used. ROUTINE MAINTENANCE: Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating. INTERIM MAINTENANCE: Sweep large debris and dust mop the floor. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above. Please recycle empty container. NOTE: Slip resistance meets or exceeds (ASTM D 2047-11) James Machine 0.5 minimum.
-
FeaturesPowder Resistant Black Mark Resistant Scuff Resistant Heel Mark Resistant
-
Global Product TypeFloor Finishes/Sealants
-
Manufacturer Part Number644B500
-
Physical FormLiquid
-
Post-Consumer Recycled Content Percent0%
-
Post-consumer-waste%0%
-
Pre-Consumer Recycled Content Percent0%
-
Product LineBetcoBest
-
Product NameBetcoBest LM Floor Finish
-
Product TypeFloor Finish
-
RecycledNo
-
ScentMild
-
Total Recycled Content Percent0%
-
Volume Capacity5 gal
-
pH9